Frequently Asked Questions
You ask, we answer! For more information feel free to contact us.
How can I figure out what panel do I need my space?
The specifications of the panels vary depending on the losses. Contact us for a FREE site survey you.
What do we mean by the term "Thermal Comfort"?
The term Thermal Comfort, express how comfortable we feel in a space depending on the temperature of components and air. This grade is determined directly by the air temperature, depending on the temperature difference of the walls of
roof, windows and the floor, but the moisture content of the site. Any change in the combination of these elements creates an immediately perceptible change in the index of thermal comfort.
A "thermally comfortable" room then, has a surface temperature and air differs by more than 2 ° C and between 20 ° C and 22 ° C. The higher the temperature of the surfaces, the greater the degree of thermal comfort. Consequently, infrared heating panels are ideal for creating 'heat comfortable "space, it ensures equal temperature difference is less than 2 ° C between the floor and ceiling.
How Infrared Heating achieves low power consumption and maximum energy efficiency?
Given the way they operate and emit heat infrared heating panels, energy presented the following advantages:
• Small loads of energy for space heating
Unlike air conditioners, heaters and the heaters, infrared heating panels warm direct structural elements of the area and the people, without any loss in heating-air. Conventional heating needs to work many more hours than infrared heating panels to achieve - indeed - inferior performance for space heating.
• Maintaining the heat even after the space ventilation
The heating means based on hot air circulation currents have a major drawback. With the you open your windows, heated air space will be lost immediately and will take a lot of time until your room is to return to previous levels of temperature. Meanwhile, all the energy consumed will be wasted. In contrast, the infrared heat is absorbed from the structural elements of space and remains in them, without being influenced by the surrounding air. Even if you open the windows, just close the space will revert to the same level of thermal comfort.
• Maximize insulation from the walls to dry
Moisture is a good conductor of heat and hence a wet wall carries the internal heat to the outside, causing direct losses. Transmitting heat directly to walls and other solid objects in space, Infrared Heat dries the moisture deep into the material, resulting in stabilization of the heat and the much less energy to maintain.
How much money can I save using infrared heating panels?
Utilizing infrared heating panel in relation to the current cost of oil you can save up to 80% compared to conventional heating means!
How does infrared heating eliminates moisture from the walls?
The moisture is transferred from the warmer to the colder surfaces. The warm air in cooler walls.
The infrared heating ensures constant, steady heat all surfaces of the space and does not rely on heating the air currents, which are deposited on the cold walls, thereby creating humidity. Thus, the structural elements of the space not merely heated surface, and internally, resulting not only not to humidify the air in the surface, but also dries the moisture had any trapped inside. The result is not only excellent immediate and dehumidification of the space, but also the dramatic enhancement of its insulation, and a dry walls are the best insulators. The only moisture stays in place on the air, which does not dry out, but instead remains sufficiently moist and healthy.
What should I consider in my electrical installation?
For installing a infrared panel, a single phase power supply is enough. In case you are going to install a large number of radiators in your place you should check if the system serves the required total load in Watt..
You can also consult your electrician or electrical design of your home.